Using this website without confusion
The site is provided for business use by workshops, maintenance teams and buyers who need blade details, sizing guidance and service information. You may browse, compare and submit an enquiry through our contact form, but you must not misuse the site, copy material for resale, or use it in a way that interrupts normal operation.
You are responsible for ensuring that the details you send are accurate, including machine type, material profile, blade width, thickness, tooth pitch and any length verification notes. If the brief is incomplete, the selected blade or service may not match the job, and that can affect cut quality, blade life and machine fit.
Product notes, fit and cutting conditions
Bandsaw blades and hacksaw blades for general trade use include common blade types such as bi-metal and carbon steel, variable pitch layouts, tooth pitch in TPI, blade width, set, run-in, feed and speed, and the role of coolant on metal cutting jobs. Machine testing remains necessary for the job in question.
- Blade choice depends on material section, hardness and profile.
- Machine condition can change the cut, especially on older saws.
- Coolant flow and feed pressure affect heat, chip removal and finish.
- Welded-to-length blades must match the machine and guide setup.
Orders, starter kits and made-to-length service
Orders may include standard stock blades, starter kit planning, weld-to-length service, machine fit checks and support for manual saw use. Where a blade is welded to length, the length supplied must be verified against the machine path and tension range before installation. If a customer asks for several blade options, the final selection may depend on the material mix and the intended cut speed.
Any guidance given on tooth pitch selection, blade width selection or run-in is based on the details supplied by the customer. MoreCut Saws may decline or adjust an order where the information is not suitable for a safe or workable blade supply.
Information supplied by the customer
When you send an enquiry, you agree that the information is provided for a real workshop requirement and not for a speculative request. This includes the material being cut, the machine type, the blade size, the desired cut finish and any fault history where a blade failure review is requested.
- Do not send false dimensions or incorrect machine details.
- Do not request a fit based on guesswork if exact measurements are available.
- Keep the machine and blade details current if the order changes.
- Make sure the nominated contact person is authorised to place the request.
Website content and ownership of material
All text, layout, images, diagrams and service descriptions on this website are owned by or used on behalf of MoreCut Saws and the operator Astros Marketing (Pty) Ltd, unless stated otherwise. You may view the content for ordinary business reference, but you may not copy it for another site, training file or sales document without permission.
The site may refer to service areas such as Johannesburg, Pretoria, Vereeniging, Durban, Cape Town, Germiston and Boksburg, as well as the Alrode, Alberton base. Those area names identify working coverage and do not create any promise beyond the service scope described on the site.
Limits on liability and legal control
To the extent allowed by South African law, MoreCut Saws is not liable for losses caused by misuse of the site, incorrect customer measurements, wrong machine details, unsuitable blade handling, or failure to follow normal workshop practice. This includes damage linked to poor run-in, incorrect feed speed, poor coolant practice or an unverified machine fit.
South African law applies to these terms. If any part of them is held to be unlawful or unenforceable, the rest will still stand. The version shown on the site replaces earlier wording and must be read with any order or service notes that apply.